Honda CR-Z Concept Unveiled

I’ve been waiting for this one for a while now. There’s been a severe market shortage of small, fuel-efficient, genuinely fun-t0-drive two-seat coupes, pretty much since Honda dropped the CR-X and replaced it with the useless del Sol. It’s of no surprise, then, that it would be Honda to pick up the mantle of the tiny two-seat pocket rocket with a modern interpretation of the beloved CR-X.

And you can’t say the time isn’t right for such a car. These days, everyone’s concerned with efficiency, but that doesn’t mean people don’t still care about fun. This strategy is the whole reason that Honda sold every CR-X they could import in the ’80’s, even with the ridiculous Honda dealer price gouging that was routine back when there was an import quota on foreign-assembled automobiles. This could be just the ticket for Honda, who’s been uncharacteristically weak in the US lately.

As for the car itself, well, it’s not that interesting mechanically. What it really is, is a two-door version of the dedicated-hybrid Insight econo-car. But remember, the original CRX was just a slightly shorter Civic, and it was still revolutionary. The CR-Z gets power from the combination of a 1.5L clean-burning gas four cylinder as well as Honda’s IMA (Integrated Motor Assist) system. In addition to the Insight’s dreadful rubber-band CVT, the CR-Z will be offered with a short-throw six speed manual transmission, for people that actually enjoy driving.

So it won’t exactly be overwhelmed with horsepower, but with a lighter curb weight than the Insight as well as a lower center of gravity, it should be an entertaining car to fling around the bends. Furthermore, expect fuel mileage and emissions numbers to be pretty stellar, just to add icing to the cake.

The styling is hard to criticize – I’d go so far as to say it’s sort of attractive. Then again, I see a lot of CR-X in the design, and I (clearly) have a soft spot in my heart for the CRX. Still, the proportions are excellent, and it looks compact yet solid and full of energy. The greenhouse is 100% modern CRX to me, but the front end is something else – huge gaping front grilles aren’t something I expect from Honda. But you know how it works – if Audi’s doing, everyone’s doing it!

About the only questionable thing I see, at least stylistically, are those bangle-esque taillights. I think perhaps the intersection of curves and hard lines just looks odd in pictures, but the back is lacking the harmony and cleanliness of the original. Still, at least it’s got that vertical glass pane in the back for reversing! If it worked in 1985, it’ll work today…

The interior looks like a mixture of Acura RSX and Honda Insight, but for a compact economy two-seater, it looks extremely nice. I especially like the large, high-definition LCD screen in the center dash, as well as the “pods” orbiting the main gauge cluster. You can see what I’m talking about better from a straight-on angle.

Although this isn’t the “full production” version of the CR-Z, expect it to appear nearly the same as this “pre-production concept.” Perhaps the huge blingey wheels will hit the garbage bin (where they belong), but otherwise what you see is what you’ll get. There should be more pictures and details on the CR-Z forthcoming next week at the Tokyo Auto Show, so stay tuned!

All Aluminum Audi A5 Prototype is 220-Pounds Lighter

Aluminum is a great material. Light, easy to work, strong if you can design with it right and relatively plentiful (if you’ve got access to lots of electricity to refine it). Audi recently gave a textbook demonstration about just what aluminum can offer by making an A5 prototype that makes extensive use of the alloy.

The A5 in question has allowed Audi to shave nearly 220-pounds from its handsome Coupe. The engineers from Audi swapped out the normal steel bits for advanced aluminum as well as carbon fiber here and there in the interest of fuel economy, emissions reduction and handling agility.

Audi did this as a way to go against the tide of rising car weights. Airbags, door beams and the like have all contributed to cars getting fatter and fatter. Audi took an existing steel-bodied A5 and clearly demonstrated the benefits of the aluminum Audi Space Frame (ASF) concept. The use of ASF reduces the weight of a car body by at least 40% compared with conventional steel construction. That means dropping the overall weight from 3,130 pounds down to 2,888 pounds.

Dropping the weight meant that Audi could do away with the standard V6 and use a four cylinder engine, and still have the same performance. Not only is the performance the same, but naturally, there are gains in economy and emissions and also to other ancillaries such as the brakes and transmission, which can also be reduced in size and weight. The handling is also markedly improved.

So why hasn’t aluminum seen widespread use in the auto industry? There’s a few reasons. First, in comparison to steel, aluminum is a little harder (and therefore expensive) to refine. Aluminum is also more costly to mine in some respects and the tooling needed to work it is also more expensive than the tooling used for steel forming.

There is also the mitigating factor that since gas prices and environmental concerns have only recently come onto the radar of car manufacturers, there has not been the motivation to really make cars all that light. They’ve been used to working with, buying and sourcing steel for the bodies of their cars, so why not go with what you know.

Well, times change, and Audi has pointed out what Colin Chapman and any sportscar guy will be able to tell you: “To go fast, add lightness”.

2010 BMW Z4 Picture

2010 BMW Z4 Night Blue

2010 BMW Z4 Wallpaper

2010 BMW Z4 Wallpapers

2010 BMW Z4 Picture

New SKY engines from mazda at Tokyo Motorshow next month

Mazda  the SKY-G and the SKY-D is new engine from Mazda .Mazda will be show the next generation petrol and diesel engines at the Tokyo Motorshow next month. The engines are called  respectively for the petrol and diesel versions.
right click to save as the image.

The SKY-G engine is a 2.0 liter unit with direct injection and an improved variable valve timing system which gives it a 15% fuel economy and torque advantage over the current MZR engine in the Mazda 3 2.0 Sport. Direct injection was previously found only on the turbocharged 2.3 liter engine but is now available in the ‘regular’ engines.

The Mazda SKY-D engine is a 2.2 liter unit that offers fuel economy of approximately 20% better than the current 2.2 liter diesel engine. It features a newly designed engine block that reduces mechanical friction to the level of a gasoline engine. Other features include piezo injectors and a two-stage turbocharger. It doesn’t sound like its a twin-turbo setup, but instead is probably a variable geometry turbocharger.

New SKY engines from mazda at Tokyo Motorshow next month

Mazda  the SKY-G and the SKY-D is new engine from Mazda .Mazda will be show the next generation petrol and diesel engines at the Tokyo Motorshow next month. The engines are called  respectively for the petrol and diesel versions.
right click to save as the image.

The SKY-G engine is a 2.0 liter unit with direct injection and an improved variable valve timing system which gives it a 15% fuel economy and torque advantage over the current MZR engine in the Mazda 3 2.0 Sport. Direct injection was previously found only on the turbocharged 2.3 liter engine but is now available in the ‘regular’ engines.

The Mazda SKY-D engine is a 2.2 liter unit that offers fuel economy of approximately 20% better than the current 2.2 liter diesel engine. It features a newly designed engine block that reduces mechanical friction to the level of a gasoline engine. Other features include piezo injectors and a two-stage turbocharger. It doesn’t sound like its a twin-turbo setup, but instead is probably a variable geometry turbocharger.

Small Car with cute look

I am sure some time you want to have a small car with two seater. In such small car you just want to go ahead with your love. But that small car should have look and speed as well.

Demand of small car is increasing a lot because of their high mobility and easy to use. Since this new small car have two seating capacity only hence this can be adjust in even small place and need only small portion of place in traffic.

BMW 1 Series top car of the year

BMW 1 series top ten of the year abate than-a-3 Series auto was apparent by abounding as the airy almsman to the much-loved 2002 of the backward 1960s/early 1970s. We didn't absolutely buy into that. Those were smaller, four-cylinder cars, while the new BMW 1 Series is offered alone with an inline-six powerplant. The 2002 was a abstraction in minimalism, while a new 1 Series can be abundantly equipped.


 

Choose amid the 128i, powered by a 3.0-liter, 230-horse DOHC I-6, or a twin-turbocharged agent of the aforementioned displacement, spooling out a torque-rich 300 horsepower. Both engines can be had with stick or automated transmission. Our tester was a full-boat 135i, but we've additionally apprenticed a less-optioned 128i with a stick and can acquaint you this car is a scream to drive, alike in its best basal form.


As with abounding Bangle-era Bimmers, the arguing point is design. Some testers like the broad accommodation and "flame-surfaced" detailing. Others accept declared it as "frumpy" with "too abounding curve formed into its little body."

So does the BMW 1 Series accept the appurtenances to be the 2009 Motor Trend Car of the Year? Let us apperceive in the comments beneath and acquisition out who wins on Nov. 18.

BMW 1 Series top car of the year

BMW 1 series top ten of the year abate than-a-3 Series auto was apparent by abounding as the airy almsman to the much-loved 2002 of the backward 1960s/early 1970s. We didn't absolutely buy into that. Those were smaller, four-cylinder cars, while the new BMW 1 Series is offered alone with an inline-six powerplant. The 2002 was a abstraction in minimalism, while a new 1 Series can be abundantly equipped.


 

Choose amid the 128i, powered by a 3.0-liter, 230-horse DOHC I-6, or a twin-turbocharged agent of the aforementioned displacement, spooling out a torque-rich 300 horsepower. Both engines can be had with stick or automated transmission. Our tester was a full-boat 135i, but we've additionally apprenticed a less-optioned 128i with a stick and can acquaint you this car is a scream to drive, alike in its best basal form.


As with abounding Bangle-era Bimmers, the arguing point is design. Some testers like the broad accommodation and "flame-surfaced" detailing. Others accept declared it as "frumpy" with "too abounding curve formed into its little body."

So does the BMW 1 Series accept the appurtenances to be the 2009 Motor Trend Car of the Year? Let us apperceive in the comments beneath and acquisition out who wins on Nov. 18.

2009 Sport Car Renault Megane Trophy

The 2009 Megane Trophy will go on sale at the end of the year in the form of kit after the completion of its development programme which will enable existing cars to be upgraded.
The 2009 Renault Megane Trophy is based on the new Megane Coupe which is powered by the Renault-Nissan Alliance’s mid-rear 3.5-liter V6 24V engine that produces 360 hp.
The front and rear light units and windscreen are from the Megane Coupe road car while flowing lines of the bodywork was designed from digital simulation technology to improve the aerodynamic.
The Renault Megane Trophy features front splitter which channel air flow to the extractors and rear diffuser and wing that generated downforce. Downforce has improved by 20 % with the refinements to the set-up and drag was reduced by 15 % , which together, represent a gain of almost 40% in terms of the new car’s aerodynamic performance over the previous generation vehicle.

Apart from that, the Megane Trophy also features butterfly doors reminiscent of the world of GT and sports-prototype racing. The V6 3.5 24V engine is mated to a semi-automatic gearbox with the same mechanical features as the current car, including an FIA-homologated sports-prototype tubular chassis, steering wheel-mounted paddle shift, double wishbone suspension with adjustable dampers, 18-inch wheels and Michelin tires.
The power of the standard 330 hp engine was boosted to 360 hp with the help from the new inlet manifold. Rebuild is still at every 5,500 km for the car’s reliability. According to Renault, with the new aerodynamic gains, the extra power from the engine will enable the 2009 Renault Megane Trophy to lap in similar times to those of a Porsche GT3.

2009 Sport Car Renault Megane Trophy

The 2009 Megane Trophy will go on sale at the end of the year in the form of kit after the completion of its development programme which will enable existing cars to be upgraded.
The 2009 Renault Megane Trophy is based on the new Megane Coupe which is powered by the Renault-Nissan Alliance’s mid-rear 3.5-liter V6 24V engine that produces 360 hp.
The front and rear light units and windscreen are from the Megane Coupe road car while flowing lines of the bodywork was designed from digital simulation technology to improve the aerodynamic.
The Renault Megane Trophy features front splitter which channel air flow to the extractors and rear diffuser and wing that generated downforce. Downforce has improved by 20 % with the refinements to the set-up and drag was reduced by 15 % , which together, represent a gain of almost 40% in terms of the new car’s aerodynamic performance over the previous generation vehicle.

Apart from that, the Megane Trophy also features butterfly doors reminiscent of the world of GT and sports-prototype racing. The V6 3.5 24V engine is mated to a semi-automatic gearbox with the same mechanical features as the current car, including an FIA-homologated sports-prototype tubular chassis, steering wheel-mounted paddle shift, double wishbone suspension with adjustable dampers, 18-inch wheels and Michelin tires.
The power of the standard 330 hp engine was boosted to 360 hp with the help from the new inlet manifold. Rebuild is still at every 5,500 km for the car’s reliability. According to Renault, with the new aerodynamic gains, the extra power from the engine will enable the 2009 Renault Megane Trophy to lap in similar times to those of a Porsche GT3.

2009 Sport Car Audi R8 GT3

Audi Sport will offer a racing sports car specifically developed for customer use in the form of the powerful 500 hp plus GT3 version of the Audi R8 which will be available from autumn 2009. The logistics and factory space required for the AUDI AG customer programme will be created over the next few months in Ingolstadt, Neckarsulm and Györ.
The Audi R8 conforms to the production-based GT3 regulations allowing the car to be fielded in numerous national and international race series.
Because the GT3 regulations prohibit the use of four-wheel drive the Audi R8 comes with the typical GT rear-wheel drive. The power is transmitted via a newly developed six-speed sequential sports gearbox. The suspension uses almost exclusively components from the production line. A comprehensive list of safety equipment guarantees the highest-level of passive safety. A modified front end and a large rear-wing generate the required downforce for the race track.
The Audi R8, which bears the project name “R16” within Audi Sport, was developed under the direction of Audi Sport. Mid August, the first prototype successfully completed a roll-out in the hands of Audi factory driver Frank Biela.

2009 Sport Car Audi R8 GT3

Audi Sport will offer a racing sports car specifically developed for customer use in the form of the powerful 500 hp plus GT3 version of the Audi R8 which will be available from autumn 2009. The logistics and factory space required for the AUDI AG customer programme will be created over the next few months in Ingolstadt, Neckarsulm and Györ.
The Audi R8 conforms to the production-based GT3 regulations allowing the car to be fielded in numerous national and international race series.
Because the GT3 regulations prohibit the use of four-wheel drive the Audi R8 comes with the typical GT rear-wheel drive. The power is transmitted via a newly developed six-speed sequential sports gearbox. The suspension uses almost exclusively components from the production line. A comprehensive list of safety equipment guarantees the highest-level of passive safety. A modified front end and a large rear-wing generate the required downforce for the race track.
The Audi R8, which bears the project name “R16” within Audi Sport, was developed under the direction of Audi Sport. Mid August, the first prototype successfully completed a roll-out in the hands of Audi factory driver Frank Biela.

Sport Car Ferrari F430

Ferrari F430 is a sports car manufactured by Ferrari. The F430's brakes were collaboratively designed with Brembo. The F430 features E-Diff, a computer-controlled limited slip differential which enables to vary torque distribution based on inputs such as steering angle and lateral acceleration.

Sport Car Ferrari F430

Ferrari F430 is a sports car manufactured by Ferrari. The F430's brakes were collaboratively designed with Brembo. The F430 features E-Diff, a computer-controlled limited slip differential which enables to vary torque distribution based on inputs such as steering angle and lateral acceleration.

Lamborghini RatÛn Sport Concept Car by Niels Steinhoff

Lamborghini RatÛn Sport Concept Car by Niels Steinhoff

The Lamborghini RatÛn designed by Niels Steinhoff is an aggressively styled concept for a flagship supercar designed to compete against the Bugatti Veyron.

In cooperation with the Munich University of Applied Sciences, Lamborghini sponsored the 'Raw Material' project tasking students from the German institution to create a series of design concepts for a future supercar.

Lamborghini RatÛn Sport Concept Car by Niels Steinhoff

Like the Reventon, Steinhoff's project is inspired by modern stealth fighters such as the F22 Raptor. This gives the design a more dynamic feeling and takes the aircraft-inspired design, which began with the Lamborghini Reventon, to the next level.

The car is formed out of one central, jet-like body and added wings, which form the fenders. Fitting the extreme over-the-edge style of the car are some humoristic features like the machine-gun inspired headlights and the wheels, which have the form of an atomic warning symbol.

The Lamborghini RatÛn was displayed at the Munich University's annual college degree show.

2009 Sport Car Lamborghini Gallardo LP560-4 Polizia

Lamborghini Gallardo LP560-4 Polizia, Automobili Lamborghini S.p.A. donated a police version of the company’s newest super sports car to Prefect Antonio Manganelli, the head of the Italian State Police with a private ceremony was held at the Viminale Palace.
The new Lamborghini Gallardo LP560-4 Polizia, which replaces the previous Lamborghini Gallardo Police Car in use by the Italian police force since 2004 has a 560 horsepower engine that can reach speeds of up to 203 mph. The car will begin service with the Lazio Highway Police Department in order to continue accident and crime prevention to sustain security on the Italian roads.
Its predecessor is proof of Lamborghini’s outstanding product quality. Since 2004, Rome’s police force has had the first-generation Lamborghini Gallardo in regular police service. The sports car has clocked nearly 87,000 miles of patrol duty on the motorways of central and southern Italy, as well as on emergency medical transport detail.

2009 Sport Car Lamborghini Gallardo LP560-4 Polizia

Lamborghini Gallardo LP560-4 Polizia, Automobili Lamborghini S.p.A. donated a police version of the company’s newest super sports car to Prefect Antonio Manganelli, the head of the Italian State Police with a private ceremony was held at the Viminale Palace.
The new Lamborghini Gallardo LP560-4 Polizia, which replaces the previous Lamborghini Gallardo Police Car in use by the Italian police force since 2004 has a 560 horsepower engine that can reach speeds of up to 203 mph. The car will begin service with the Lazio Highway Police Department in order to continue accident and crime prevention to sustain security on the Italian roads.
Its predecessor is proof of Lamborghini’s outstanding product quality. Since 2004, Rome’s police force has had the first-generation Lamborghini Gallardo in regular police service. The sports car has clocked nearly 87,000 miles of patrol duty on the motorways of central and southern Italy, as well as on emergency medical transport detail.

Open Job Vacancy with the Lotus F1 Team

Great news for you technician or programmer
Litespeed F3 Team

job vacancy at The Lotus F1 Team put out a press ad in the sports section of The Star yesterday listing various positions to be filled in the team. The list is quite extensive and all you have to do is email your CV and cover letter to 1MalaysiaHR@lotusf1team.com.

A quick glimpse at lotusf1team.com shows it doesn’t really have much content yet. The domain lists ex-Lotus employee and Litespeed co-founder Nino Singh Judge as the admin and technical contact.

* Aerodynamics – Project Leader Aerodynamics, Junior Aerodynamicist, Head of CFD, CFD Engineer.
* Composites Design – Head of Composite Design, Senior / Junior Composite Designer, Composite Engineer.
* Composite – Head of Composite Layup Shop, Senior / Junior Layup Technician, Head of Composite Trim Shop, Senior / Junior Trim Shop Technician
* Electronics – Head of Electronics, Senior / Junior Electronics Engineer, Senior Control Engineer, Control Software Engineer
* Factory – Factory Manager, Senior / Junior Maintenance
* Gearbox Design – Head of Gearbox Design, Senior / Junior Gearbox Design
* Gearbox Assembly – Head of Gearbox Shop, Race Gearbox Technician
* Hydraulics – Head of Hydraulics Shop, Race Hydraulics Technician, Test Hydraulics Technician
* Mechanical Production – Head of Mechanical Production, Senior / Junior Machinist, Fabricator
* Mechanical Design – Head of Mechanical Design, Senior Mechanical Design Engineer, Senior Mechanical Designer
* Pattern Shop – Head of Pattern Shop, Senior / Junior Pattern Maker
* Production, Production Control and Purchasing – Head of Production, Senior Production Engineer, Mechanical Buyer, Composite Buyer, General Buyer, Aerodynamics Buyer
* Quality Control & Inspection – Head of Inspection, Senior / Junior Inspection Technician
* Design Office – Drawing Office Manager
* R&D – Head of R&D, Senior R&D Engineer, Senior R&D Technician
* Race Engineering – Test Engineer, Race Data Engineer, Test Data Engineer, Aero Support Engineer
* Race & Test – Logistic Manager, Race & Test Travel Secretary, Clothing & Team Gear
* Race Team – Race Chief Mechanic, Race Parts Mechanic
* Stress Analysis – Senior / Junior FEA Engineer
* Sub Assembly – Head of Sub Assembly, Sub Assembly Technician
* Test Team – Test Chief Mechanic, Test Part Mechanic, Test Team Truckie, Test Team Mechanic
* Vehicle Science – Head of Vehicle Dynamics, Vehicle Dynamics Engineer, Senior / Junior Software Engineer
* Marketing & PR – Head of Marketing, Marketing Manager, Tri-lingual Website Designers, Graphic Designers, Executive Assistant, Business Development Manager, Sponsorship Manager, Sponsor Account Manager, Head of PR / Tri-Lingual PR Officer, Press Officer, Hospitality Coordinator
* Finance – Financial Controller, Finance Manager, Finance Executive
* Legal – Head of Legal, Legal Manager, Legal Executive
* HR – Head of HR, HR Manager, HR Executive
* IT – Head of Information Technology, CAD Manager, Senior IT Engineer, Race IT Engineer, Test IT Engineer, IT Technician

It’s not really clear at the moment whether all jobs are available immediately. I have a feeling alot of the positions would probably already be filled by Litespeed F3 engineers. The Aerodynamics and Gearbox department will probably have to deal with FondTech and Xtrac respectively as when the team was announced, they were mentioned as suppliers to the team. Cosworth will be supplying the engine. I think what Malaysian can immediately look out for are the Marketing & PR, Finance, HR and Legal departments.

Open Job Vacancy with the Lotus F1 Team

Great news for you technician or programmer
Litespeed F3 Team

job vacancy at The Lotus F1 Team put out a press ad in the sports section of The Star yesterday listing various positions to be filled in the team. The list is quite extensive and all you have to do is email your CV and cover letter to 1MalaysiaHR@lotusf1team.com.

A quick glimpse at lotusf1team.com shows it doesn’t really have much content yet. The domain lists ex-Lotus employee and Litespeed co-founder Nino Singh Judge as the admin and technical contact.

* Aerodynamics – Project Leader Aerodynamics, Junior Aerodynamicist, Head of CFD, CFD Engineer.
* Composites Design – Head of Composite Design, Senior / Junior Composite Designer, Composite Engineer.
* Composite – Head of Composite Layup Shop, Senior / Junior Layup Technician, Head of Composite Trim Shop, Senior / Junior Trim Shop Technician
* Electronics – Head of Electronics, Senior / Junior Electronics Engineer, Senior Control Engineer, Control Software Engineer
* Factory – Factory Manager, Senior / Junior Maintenance
* Gearbox Design – Head of Gearbox Design, Senior / Junior Gearbox Design
* Gearbox Assembly – Head of Gearbox Shop, Race Gearbox Technician
* Hydraulics – Head of Hydraulics Shop, Race Hydraulics Technician, Test Hydraulics Technician
* Mechanical Production – Head of Mechanical Production, Senior / Junior Machinist, Fabricator
* Mechanical Design – Head of Mechanical Design, Senior Mechanical Design Engineer, Senior Mechanical Designer
* Pattern Shop – Head of Pattern Shop, Senior / Junior Pattern Maker
* Production, Production Control and Purchasing – Head of Production, Senior Production Engineer, Mechanical Buyer, Composite Buyer, General Buyer, Aerodynamics Buyer
* Quality Control & Inspection – Head of Inspection, Senior / Junior Inspection Technician
* Design Office – Drawing Office Manager
* R&D – Head of R&D, Senior R&D Engineer, Senior R&D Technician
* Race Engineering – Test Engineer, Race Data Engineer, Test Data Engineer, Aero Support Engineer
* Race & Test – Logistic Manager, Race & Test Travel Secretary, Clothing & Team Gear
* Race Team – Race Chief Mechanic, Race Parts Mechanic
* Stress Analysis – Senior / Junior FEA Engineer
* Sub Assembly – Head of Sub Assembly, Sub Assembly Technician
* Test Team – Test Chief Mechanic, Test Part Mechanic, Test Team Truckie, Test Team Mechanic
* Vehicle Science – Head of Vehicle Dynamics, Vehicle Dynamics Engineer, Senior / Junior Software Engineer
* Marketing & PR – Head of Marketing, Marketing Manager, Tri-lingual Website Designers, Graphic Designers, Executive Assistant, Business Development Manager, Sponsorship Manager, Sponsor Account Manager, Head of PR / Tri-Lingual PR Officer, Press Officer, Hospitality Coordinator
* Finance – Financial Controller, Finance Manager, Finance Executive
* Legal – Head of Legal, Legal Manager, Legal Executive
* HR – Head of HR, HR Manager, HR Executive
* IT – Head of Information Technology, CAD Manager, Senior IT Engineer, Race IT Engineer, Test IT Engineer, IT Technician

It’s not really clear at the moment whether all jobs are available immediately. I have a feeling alot of the positions would probably already be filled by Litespeed F3 engineers. The Aerodynamics and Gearbox department will probably have to deal with FondTech and Xtrac respectively as when the team was announced, they were mentioned as suppliers to the team. Cosworth will be supplying the engine. I think what Malaysian can immediately look out for are the Marketing & PR, Finance, HR and Legal departments.

New Fiat Chrysler Alfa Romeo 166

Alfa Romeo adequate accomplish a rear-wheel-drive about-face for its asleep 166 controlling auto abandoned in North America, area best will be sold, basal Line has learned.

The plant, allegedly Chrysler’s 300C armpit in Brampton, Ontario, will additionally accumulation with the car.

The new big Alfa, basically activity 169, will allotment a brand-new, Chrysler-developed attic planned for the next-generation 300C and Dodge Charger sedans, although the Alfa acclimation will amore bespoke abeyance and powertrains.

Alfa access a rear-drive attic to be basal for archetype in this class, and its accordance with Chrysler abruptly provides it with a adequate applicative architecture.

Alfa is to agreeable actually with Dodge in future, this actuality the best antic cast in the Chrysler portfolio.

Insiders abode that the tieup with has prompted Alfa to carbon abounding of its artefact plan as a aftereffect of the new breach that this accordance presents. Apart from the activity of abounding Alfas in the U.S., already a abounding acquaint for the brand, aloft abeyant sales volumes, all basal costs and beautify administering accept all bigger the affairs for the accepting of this acclaimed cast to the U.S., which is slated for 2011.

Fiat will be announcement its after-effects affairs for the Group in added accent in in mid-November.

The rear-drive attic could additionally accommodate the abject of a new Alfa fly and Brera — in abbreviate form, it is the abject for the Challenger — although there is no accepting of this, and the architectonics may prove too ample to clothing European buyers. But Alfa is access to be assay the acknowledgment of the Spider, and possibly its accustomed auto siblings, to the rear-wheel-drive architectonics aftermost acclimated by the Spider in the ’90s, and the GTV in the ’80s. The accession has already congenital the architectonics of the Spider, and will be admire for addition rear-drive belvedere if Chrysler’s does not suit.

Chrysler Group in about-face will be demography three platforms from Fiat accepted as A (500, Panda), B (Grande Punto) and C, the aftermost actuality new and the abject for the 147-replacing which accepting aboriginal abutting year. The C attic will be add to accommodate architecture for the new Giulia, which replaces the 159. In theory, the Giulia and Milano could additionally be bogus in the U.S. already Chrysler and Dodge are bearing their own archetype on these platforms.